In this study, plasma-catalytic steam reforming of toluene as a biomass tar model compound was carried out in a coaxial dielectric barrier discharge (DBD) plasma reactor. The effect of Ni/Al2O3 catalysts with different nickel loadings (5-20 wt%) on the plasma-catalytic gas cleaning process was evaluated in terms of toluene conversion, gas yield, by-products formation and energy efficiency of the plasma-catalytic process. Compared to the plasma reaction without a catalyst, the combination of DBD with the Ni/Al2O3 catalysts significantly enhanced the toluene conversion, hydrogen yield and energy efficiency of the hybrid plasma process, while significantly reduced the production of organic by-products. Increasing Ni loading of the catalyst improved the performance of the plasma-catalytic processing of toluene, with the highest toluene conversion of 52% and energy efficiency of 2.6 g/kWh when placing the 20 wt%Ni/Al2O3 catalyst in the plasma. The possible reaction pathways in the hybrid plasma-catalytic process were proposed through the combined analysis of both gas and liquid products. (C) 2017 Elsevier B.V. All rights reserved.