Oil leakages often cause fatal disasters for environmental pollution but an efficient treatment of the oil spills is still very challenging. Sponge-substrates with superhydrophobicity and superoleophilicity have been attracted much attention for oil/water separation. In this study, an inexpensive commercial melamine sponge was chemically modified for the uses of oil spills treatment by oil water separation. Inspiring from the superhydrophobic property of lotus leaf, pyrrole was polymerized by a simple vapor-phase deposition to encapsulate the raw melamine-formaldehyde (MF) sponge. The as-formed thin polypyrrole walls were utilized as reducing reagent to generate Ag nanoparticles on the capsuled sponge. Accordingly, a superhydrophobic melamine sponge with a two-tier hierarchical structure was achieved after fluorination, and this material was applied to absorb oil from water. The absorption capacity, absorption rate and recyclability were investigated. This superhydrophobic sponge exhibited an efficient and fast oil/water separation performance in complicated environment and could be applied in industrial production because of its low cost and simple fabrication procedure. This study presents a facile strategy for the fabrication of efficient oil sorbents based on a two-tier hierarchical structure, providing a novel means for the upgrading of engineered sorption materials. (C) 2017 Elsevier Inc. All rights reserved.