Supercapacitors are evolving into an important component in energy storage technology with the capability for storing and discharging energy very quickly and effectively. State-of-the-art supercapacitors feature activated carbon electrodes impregnated with a non-aqueous electrolyte (typically acetonitrile) that operate at voltages between 2.2-2.7V. Unfortunately, activated carbons have low specific capacitance (100-120 F g(-1)) in organic electrolytes which severely limits the energy density of supercapacitors. In addition, organic solvents are often flammable leading to safety and environmental concerns. Aqueous electrolytes, on the other hand, are safer, cheaper and have higher ionic conductivity, promising higher capacitance electrodes. However, the low voltage window enforced by the low decomposition voltage of water around 1.23V is a major challenge. Here, we demonstrate symmetric supercapacitors operating at an ultrahigh voltage of 1.8V that can provide specific electrode capacitances up to 716 F g(-1), which is higher than traditional activated carbon electrodes. This is possible through designing both the electrode and electrolyte to work synergistically towards improving not only the capacitance of the electrodes, but also the voltage and cycling stability of the supercapacitor. We also demonstrate by using a simple laser technique the possibility of fabricating micro-supercapacitors with great potential for miniaturized electronics. This work provides an effective strategy for designing and fabricating aqueous supercapacitors that hold promise for a sustainable energy future. (C) 2017 Elsevier Ltd. All rights reserved.