This paper investigates the effect of various sintering temperatures from 800 to 1500 degrees C on the microstructure evolution of cp-titanium processed by Spark Plasma Sintering (SPS). The material processing conditions under consideration may change the obtained atomic order and microstructure. The different relation of the mechanical and corrosion resistance properties observed in the analyzed results could at the same time be shaped in the expected range. The SPS procedure allows the obtainment of nearly theoretical densities of the compacts and excellent mechanical properties (UTS = 892 MPa, CS = 1442 MPa). The results confirm that the contact angle measurement could support the process control, particularly if a microstructure feature is considered. (C) 2017 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.