This paper is a continuation of the previous work and aims to understand how the inlet incidence flows influence the transonic tip leakage loss-generation processes and overtip heat-transfer. Five incidences ranged from 15 to 15, and two tip gaps of 0.4% and 1.0% of blade span are investigated. Numerical calculations have been carried out by means of the ANSYS-CFX calculation tool, using the k-epsilon SST turbulence model to study the sensitivities of transonic blade tip aerothermal performance to flow incidences in an RT27a linear turbine-cascade. Flow patterns over the transonic blade tip at design incidence, overtip flow fields and aerodynamics sensitivity to flow incidence, and transonic tip heat transfer characteristics at different incidences are investigated. The computed results show a fair agreement with the rig data and show that the effects of flow incidence on aerodynamics and heat transfer in the front part of blade tips are bigger than that in the rear part of blade tips, and flow incidence effects at 0.4% tip gap is smaller than that at 1.0% tip gap. At various incidences, as the tip gap height increases, the shockwave reflections become more obvious, and it hence reduces the leakage flow. However, the large tip clearance height induces elliptical TLV core structure, and leads to strong mixing with the mainflow. For the blade-tip trailing-edge flow regions, at two blade tip gaps the overtip heat transfer decreases normally as the incidence increases. (C) 2017 Elsevier Ltd. All rights reserved.