In annular two-phase gas-liquid flow, the liquid film on the wall consists of relatively quiescent substrate regions which are traversed by large amplitude, high velocity waves known as disturbance waves. The turbulent disturbance wave regions have relatively high average heat transfer coefficients (low average wall temperatures) compared to the (probably laminar) substrate regions. Nevertheless, there is evidence that nucleate boiling (necessitating a higher wall temperature) occurs first in the wave regions. This paper explores the hypothesis that wall temperature fluctuations due to turbulence in the disturbance waves are of sufficient magnitude to give localized triggering of nucleation sites and hence nucleate boiling. This hypothesis was explored using Computational Fluid Dynamics (CFD). The turbulence was modelled using wall-resolved LES. The results lend weight to the hypothesis that the nucleate boiling observed in disturbance waves is due to transient local high temperatures induced by the turbulence. (C) 2017 Published by Elsevier Ltd.