In search of a viable way to enhance the power conversion efficiency (PCE) of quantum dot-sensitized solar cells, we have designed a method by introducing a hole transporting layer (HTL) of p-type CuS through partial cation exchange process in a postsynthetic ligand-assisted assembly of nanocrystals (NCs). High-quality CdSe and CdSSe gradient alloy NCs were synthesized through colloidal method, and the charge carrier dynamics was monitored through ultrafast transient absorption measurements. A notable increase in the short-circuit current concomitant with the increase in open-circuit voltage and the fill factor led to 45% increment in PCE for CdSe-based solar cells upon formation of the CuS HTL. Electrochemical impedance spectroscopy further revealed that the CuS layer formation increases recombination resistance at the TiO2/N/electrolyte interface, implying that interfacial recombination gets drastically reduced because of smooth hole transfer to the redox electrolyte. Utilizing the same approach for CdSSe alloy NCs, the highest PCE (4.03%) was obtained upon CuS layer formation compared to 3.26% PCE for the untreated one and 3.61% PCE with the conventional ZnS coating. Therefore, such strategies will help to overcome the kinetic barriers of hole transfer to electrolytes, which is one of the major obstacles of high-performance devices.