In this study, 1-methyl-1-butylpiperidinium bis(trifluoromethanesulfonyl)-imide (PP14TFSI)-sulfolane/lithium difluoro(oxalato) borate (LiDFOB) based electrolytes with inherent thermal stability and low flammability are investigated as promising alternatives of conventional LiPF6/carbonate electrolyte in high voltage Li/Li-1.15(Ni0.36Mn0.64)(0.85)O-2 cells at elevated temperatures. The safe and stable electrolyte candidates are selected by optimizing relative composition and represent high oxidative stability (higher than 5.2 V vs Li/Li+) above 55 degrees C. The Li/Li-1.15(Ni0.36Mn0.64)(0.85)O-2 cells with E60 electrolyte achieved 172.5 and 238.8 mAh g(-1) after 50 cycles between 2.0 and 4.6 V at 0.5C at 55 and 70 degrees C. Moreover, the Li/Li-1.15(Ni0.36Mn0.64)(0.85)O-2 cell with E60 electrolyte obtains a superior discharge capacity of 97.9 mAh g(-1) at high rate of 3C at 70 degrees C. At extremely high temperature of 85 degrees C, the cell with E60 electrolyte delivers 218.7 mAh g(-1) after 50 cycles at 1C. The excellent cycling performance in high voltage Li/Li-1.15(Ni0.36Mn0.64)(0.85)O-2 cells at elevated temperatures is attributed to the intrinsic oxidative stability and the compact and stable cathode-electrolyte interface (CEI) film derived from E60 electrolyte. We believe it a promising candidate that can be safely used for high voltage Li-rich cells at elevated temperature. (c) 2018 Elsevier Ltd. All rights reserved.