The development of non-precious metal based electrocatalysts is essential for Hydrogen Evolution Reaction (HER) from the splitting of water. Recently copper tin sulphide (CTS) has gained attention due to its favourable properties in photovoltaic devices and photo catalysis. In this work, CTS has been explored as an electrocatalyst in HER. Cu2SnS3 (CTS (A)) and Cu4SnS4 (CTS (B)) are prepared by a simple solvothermal method. From the XRD analysis, tetragonal and orthorhombic phase is confirmed for CTS (A) and CTS (B), respectively. Morphology and composition of the prepared samples has been confirmed by SEM and EDAX analysis. Optical study reveals that the band gap energy is around 1.55 and 1.20 eV for CTS (A) and CTS (B), respectively. From photoluminescence studies, CTS (B) has been observed to have a greater recombination of charge carriers than CTS (A). The prepared materials were tested and compared for its performance as electrocatalysts for HER, where the current density of CTS (A) is higher than that of CTS (B). Furthermore, the calculated Tafel slope was 98 mV/dec and 110 mV/dec for CTS (A) and CTS (B), respectively. On the other hand, CTS (A) and CTS (B) have showed good stability even after 500 cycles in acidic medium. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.