Understanding the interactions between the bubbles and solid walls is important for predicting how the bubbly flow characteristics, such as void fraction and statistical distribution of bubble sizes, are affected by the presence of solid boundaries. In the present research, the numerical simulations with Interface tracking method are performed to evaluate the interfacial forces' closures in shear flow field under well controlled conditions. The proportional-integral-derivative bubble controller is adopted to keep a single bubble at fixed position near the wall by balancing the forces in all three directions. This allows the extraction of the interfacial forces and the calculation of the corresponding coefficients. Validation tests have previously been conducted by the authors to compare the interfacial closures' results against the experimental data. In this work, the influence of wall distance, relative velocity and bubble deformation on the interfacial forces are investigated. The results show that as the bubble approaches the wall, It experiences a transition from attractive force to repulsive force normal to the wall. The bubble Reynolds number also has significant impact on the interfacial forces: the net lateral force changes direction at Re-b = 35. The coupled phenomenon of bubble deformation and wall effect is investigated as well. The net lift sign change Is observed at E0 = 2.3 when the dimensionless wall distance (the ratio between the distance from the bubble center to the wall and the bubble diameter) Is equal to 1. The presented studies complement the state-of-the-art knowledge and those are aimed to help Improve the closure laws for interfacial forces and contribute to the multiphase computational fluid dynamics (M-CFD) closure model development. (C) 2017 Elsevier Ltd. All rights reserved.