Potassium chloride crystals are cubic, which often leads to caking and greatly limits their applications. This caking can be overcome by modifying the crystal shape toward sphericity. Spherical particles have a high anti-caking ability and flowability. In this work, spherical KCl particles were prepared using a simple cooling crystallization process designed to function without additives. Among the four main processes in the crystallization of spherical particles, i.e., nucleation, growth, agglomeration, and attrition, agglomeration is the greatest contributor to the formation of spherical KCl particles, which were prepared following the principle that the adhesion force must be larger than the dispersion force. The adhesion free energy between KCl particles and solvents (i.e., water, n-hexane, formamide, diazomethane, methanol, ethanol, ethyl acetate, ethylene glycol, and dimethyl sulfoxide) was calculated using the Lifshitz-van der Waals add-base approach, and water was found to be the most appropriate solvent because of its attractive interaction with the crystals. According to the relationship between the adhesion force and dispersion forces, we found that the stirring rate should be lower than 1300 rpm. Additionally, the effects of stirring rate and cooling rate on the KCl products were investigated and optimized, and the optimal conditions were found to be 400-500 rpm and 10-15 min/degrees C, respectively. All of the spherical KCl products prepared under the optimal conditions show a better morphology, flowability, and anti-caking performance than the original crystals. (C) 2017 Elsevier B.V. All rights reserved.