Solar Salt-based nanofluids have attracted significant scientific interest in recent years due to their improved thermal properties, making them strong candidates as thermal energy storage materials and/or heat transfer fluids in CSP plants. There have been reports on increased specific heat due to the addition of nanoparticles, however, there is a lack of comprehensive information on other essential properties affecting the heat transfer, such as the viscosity. This article concerns the rheological behaviour of nanofluids made of Solar Salt (mass percentage at 60% NaNO3 - 40% KNO3) as the base fluid and silica or alumina nanoparticles as additives. The evolution of these nanofluids viscosity as a function of the shear rate (1-1000 s(-1)) at a temperature range of 250-400 degrees C was measured and analysed. The impact of the salt purity (refined or industrial grade), the nano particle concentration (0.5-1.5 wt%) and the rheometer measuring configuration (coaxial cylinder or parallel plate) are examined. The results showed in general a Newtonian behaviour of the nanofluids with independency of the rheometer configuration. The relationship between the viscosity and the temperature follows an Arrhenius model. The influence of the nanoparticle concentration on the viscosity of the refined grade Solar Salt is analysed according to the Maron-Pierce and Kriegher-Dougherty models for the nanofluids containing alumina, and silica nanoparticles respectively, due to their different shape.