Journal of Industrial and Engineering Chemistry, Vol.62, 96-105, June, 2018
Hydrogenation efficiency of highly porous Cu-Al oxides derived from dealuminated LDH in the conversion of furfural to furfuryl alcohol
E-mail:
As-synthesized Cu-Al LDH was dealuminated by treating with Ammonium hexafluorosilicate (AFS) and calcined to obtain Cu-Al oxide. Cu species from 5 to 20 wt% was impregnated on Cu-Al oxide derived from dealuminated Cu-Al LDH. Resulting samples were characterized by XRD, AAS, BET, TEM, TPR and XPS techniques. Copper species impregnated on dealuminated Cu-Al oxide exhibit enhanced activity in hydrogenation of furfural (FAL) to furfuryl alcohol (FOL). Hydrogen uptake and FAL conversion were found to increase proportionately as the copper species dispersed in the pores vary from 5 to 15 wt%. A maximum yield of 87 mol% FAL was observed with 15 wt% Cu loaded sample. Percent occupancy of the copper active species in the pores is calculated by the decrease in pore volume. A factor called pore occupancy hydrogenation efficiency is introduced to explain the FAL conversion ability of the copper loaded mixed oxides. In contrast, mixed oxides derived from Cu-Al LDH without dealumination showed moderate conversion.
- Adam J, Blazso M, Meszaros E, Stocker M, Nilsen MH, Bouzga A, Hustad JE, Gronli M, Oye G, Fuel, 84(12-13), 1494 (2005)
- He RH, Ye P, English BC, Satrio JA, Bioresour. Technol., 100(21), 5305 (2009)
- Kijenski J, Winiarek P, Paryjczak T, Lewicki A, Mikolajska A, Appl. Catal. A: Gen., 233(1-2), 171 (2002)
- Rao RS, Baker RTK, Vannice MA, Catal. Lett., 60(1-2), 51 (1999)
- Thomas D, Catalyst comprising Raney nickel with adsorbed molybdenum compound. U.S. Patent 4153578A (1979).
- Leo FJ, Herman FJ, Copper chromite catalyst for preparation of furfuryl alcohol from furfural. U.S. Patent 4251396 (1981).
- Elizaveta PA, Juldash M, Ivan PP, Lidia GG, Jormukhamat AG, Ildgam BA, Aexei DM, Larisa CJ, Lazar PD, Bassheva BB, Patent 4261905 (1981).
- Rao R, Dandekar A, Baker RT, Vannice MA, J. Catal., 171(2), 406 (1997)
- Liu H, Hu Q, Fan G, Yang L, Li F, Catal. Sci. Technol., 5, 3960 (2015)
- Vaidya PD, Mahajani VV, Ind. Eng. Chem. Res., 42(17), 3881 (2003)
- Sitthisa S, Sooknoi T, Ma YG, Balbuena PB, Resasco DE, J. Catal., 277(1), 1 (2011)
- Sitthisa S, Resasco DE, Catal. Lett., 141(6), 784 (2011)
- Nagaraja BM, Kumar VS, Shasikala V, Padmasri AH, Sreedhar B, Raju BD, Rao KSR, Catal. Commun., 4, 287 (2003)
- Chen XF, Li HX, Luo HS, Qiao MH, Appl. Catal. A: Gen., 233(1-2), 13 (2002)
- Nagaraja BM, Padmasri AH, Seetharamulu P, Reddy KHP, Raju BD, Rao KSR, J. Mol. Catal. A-Chem., 278(1-2), 29 (2007)
- Lee SP, Chen YW, Ind. Eng. Chem. Res., 38(7), 2548 (1999)
- Yan K, Liao J, Wu X, Xie X, RSC Adv., 3, 3853 (2013)
- Prakruthi HR, Chandrashekara BM, Prakash BSJ, Bhat YS, Catal. Sci. Technol., 5, 3667 (2015)
- Prakruthi HR, Prakash BSJ, Bhat YS, J. Mol. Catal. A-Chem., 408, 214 (2015)
- Forano C, Hibino T, Leroux F, Gueho CT, Handbook of Clay Science, Developments in Clay Science, vol. 1, Published by Elsevier Ltd., p. 1021 2006.
- Liu P, Derchi M, Hensen EJM, Appl. Catal. A: Gen., 467, 124 (2013)
- Granados-Reyes J, Salagre P, Cesteros Y, Appl. Catal. A: Gen., 536, 9 (2017)
- Cantrell DG, Gillie LJ, Lee AF, Wilson K, Appl. Catal. A: Gen., 287(2), 183 (2005)
- Xi Y, Davis RJ, J. Catal., 254(2), 190 (2008)
- Xi YZ, Davis RJ, J. Catal., 268(2), 307 (2009)
- Gao L, Teng G, Lv J, Xiao G, Energy Fuels, 24, 646 (2010)
- Campos-Molina MJ, Santamaria-Gonzalez J, Merida-Robles J, Moreno-Tost R, Energy Fuels, 24, 979 (2010)
- Xie WL, Liu YW, Chun H, Catal. Lett., 142(3), 352 (2012)
- Kumar P, Srivastava VC, Mishra IM, Energy Fuels, 29(4), 2664 (2015)
- Choudary BM, Kantam ML, Neeraja V, Rao KK, Figueras F, Delmotte L, Green Chem., 3, 257 (2001)
- Veloso CO, Perez CN, de Souza BN, Lima EC, Dias AG, Monteiro JLF, Henriques CA, Microporous Mesoporous Mater., 107, 23 (2008)
- Choudary BM, Kantam ML, Reddy CRV, Rao KK, Figueras F, J. Mol. Catal. A-Chem., 146, 279 (1999)
- Cerveny J, Splichalova J, Kacer P, Kovanda F, Kuzma M, Cerveny L, J. Mol. Catal. A-Chem., 285(1-2), 150 (2008)
- Sharma SK, Parikh PA, Jasra RV, J. Mol. Catal. A-Chem., 278(1-2), 135 (2007)
- Abello S, Dhir S, Colet G, Perez-Ramirez J, Appl. Catal. A: Gen., 325(1), 121 (2007)
- Abello S, Medina F, Tichit D, Perez-Ramirez J, Sueiras JE, Salagre P, Cesteros Y, Appl. Catal. A: Gen., 70, 577 (2007)
- Feng J, He Y, Liu Y, Du Y, Li D, Chem. Soc. Rev., 44, 5291 (2015)
- Yang R, Gao Y, Wang J, Wang Q, Dalton Trans., 43, 10317 (2014)
- Ramesh S, Prakash BSJ, Bhat YS, Appl. Catal. A: Gen., 414-415, 157 (2012)
- Venkatesha NJ, Prakash BS, Bhat YS, RSC Adv., 5, 69348 (2015)
- Velu S, Swamy CS, Appl. Catal. A: Gen., 145(1-2), 141 (1996)
- Lwin Y, Yarmo MA, Yaakob Z, Mohamad AB, Daud WRW, Mater. Res. Bull., 36(1-2), 193 (2001)
- Zhang J, Chen J, ACS Sustain. Chem. Eng., 5, 5982 (2017)
- Shetti VN, Kim J, Srivastava R, Choi M, Ryoo R, J. Catal., 254(2), 296 (2008)
- Brigs D, Seah MP (Eds.), Practical Surface Analysis by Auger and X-ray Photoelectron Spectroscopy, Wiley, New York, 1983.
- Tanasoi S, Tanchoux N, Urda A, Tichit D, Sandulescu I, Fajula F, Marcu IC, Appl. Catal. A: Gen., 363(1-2), 135 (2009)
- Cobo M, Quintero A, de Correa CM, Catal. Today, 133, 509 (2008)
- Oyama ST, Zhang XM, Lu JQ, Gu YF, Fujitani T, J. Catal., 257(1), 1 (2008)
- van Druten GMR, Ponec V, Appl. Catal. A: Gen., 191(1-2), 163 (2000)
- Hernandez DV, Caballero JMR, Gonzalez JS, Tost RM, Robles JMM, Cruz MAP, Lopez AJ, Huesca RH, Torres PM, J. Mol. Catal. A-Chem., 383-384, 106 (2014)
- Avery NR, Surf. Sci., 125, 771 (1983)
- Srivastava RD, Guha AK, J. Catal., 91, 254 (1985)
- Bradley MK, Robinson J, Woodruff DP, Surf. Sci., 604, 920 (2010)