화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Chemical Engineering Research, Vol.56, No.3, 327-334, June, 2018
DOI10.9713/kcer.2018.56.3.327  Export Citation
졸-겔법에 의해 Tetraethoxysilane과 Methyltrimethoxysilane으로부터 발수코팅제 제조
Preparation of Water-Repellent Coating Solutions from Tetraethoxysilane and Methyltriethoxysilane by Sol-Gel Method
김동구, 이병화1, 송기창†
  • 건양대학교 의료신소재학과, 35365 대전시 서구 관저동로 158
  • 1대흥화학공업(주) 기술연구소, 17746 경기도 평택시 산단로 64번길 68
Dong Gu Kim, Byung Wha Lee1, and Ki Chang Song†
  • Department of Biomedical Materials, Konyang University, 158 Gwanjeodong-ro, Seo-gu, Daejeon, 35365, Korea
  • 1Research Institute of Daeheung Chemical Industry Co., 68, Sandan-ro 64beon-gil, Pyeongtaek-si, Gyeonggi-do, 17746, Korea
E-mail:
초록
출발물질로서 테트라에톡시실란(TEOS)과 메틸트리메톡시실란(MTMS)을 사용하여 졸-겔법에 의해 발수성 코팅용액을 제조하였다. 이 용액을 냉연강판 위에 스핀 코팅하고 열처리하여 비불소계 발수 코팅 도막을 제조 하였다. 이 과정 중 MTMS/TEOS의 몰 비, 물 농도 및 암모니아 농도가 코팅 도막의 발수성에 미치는 영향을 연구하였다. MTMS/TEOS의 몰 비를 1~20으로 변화시켜 제조 한 코팅 도막의 접촉각은 MTMS/TEOS 몰 비가 10 일 때 최대 수치인 108°를 나타내었다. 반면에 물의 첨가량을 증가시킴에 따라 코팅 도막의 접촉각이 증가하여 발수성이 향상되었다. 또한 암모니아의 첨가량이 커질수록 실리카 입자의 크기가 커져 실리카 입자의 표면 거칠기가 증가하므로 발수성이 증가하였다.
Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of 108° when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.
Keywords:Sol-Gel Method;TEOS;MTMS;Non-fluorine;Water Contact Angle;Water-repellent Coating Solutions
  1. Bakhshi M, Ozeiri M, Sharif A, Aalaie J, Korean J. Chem. Eng., 34(3), 903 (2017)
  2. Kim T, Jeong J, Chung I, J. Adhes. Interface, 16, 116 (2015)
  3. Kim NW, Ahn CY, Song KC, Korean Chem. Eng. Res., 54(3), 387 (2016)
  4. Feng L, Zhang ZY, Mai ZH, Ma YM, Liu BQ, Jiang L, Zhu DB, Angew. Chem.-Int. Edit., 43, 2012 (2004)
  5. Jeevajothi K, Subasri R, Raju KRCS, Ceram. Int., 39, 2111 (2013)
  6. Lee DI, Jang SH, Song KC, Korean Chem. Eng. Res., 41, 268 (2003)
  7. ASTM D 3359, “Standard Test Methods for Measuring Adhesion by Tape Test,” ASTM International, 927-929(1997).
  8. Jeevajothi K, Crossiya D, Subasri R, Ceram. Int., 38, 2971 (2012)
  9. Kuo CFJ, Chen JB, Shih CY, Huang CY, J. Appl. Polym. Sci., 131, 40317 (2014)
  10. Lim YH, Kim DK, Jeong YK, J. Korean Powder Metall. Inst., 23(6), 442 (2016)
  11. Ibrahim IAM, Zikry AAF, Sharaf MA, J. Amer. Sci., 6(11), 985 (2010)