An electrolyte for electrochemical hydrogen charging of corrosion-susceptible alloys is developed, which preserves the surface integrity at nano-scale by minimizing the surface roughness alternation. To assure the formation and adsorption of the hydrogen from the electrolyte, permeation tests were performed on Fe 3 wt%Si ferritic steel. X-ray photo-electron spectroscopy method was used to check the effect of the glycerol-based solution on the chemical composition of the sample surface. The surface analysis revealed minimal chemical and topography alteration on the surface after different electrochemical treatments. Various types of in situ small-scale mechanical tests such as nano-indentation, micro-pillar compression, and micro-cantilever bending tests were performed inside this electrolyte while the samples being charged with hydrogen under cathodic potential. These small-scale mechanical tests showed that the solution facilitates studying hydrogen embrittlement in nano- or micro-scale. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.