To comply with the stringent environmental regulations concerning the quality of fuels the production of ultra low sulfur fuels is obligatory. Consequently, the removal of aromatics from fuels has turned to be a serious issue. This is due to the fact that the presence of aromatics in fuel deters the ultra-low sulfur fuel production. Therefore the researcher's interest has involved the dearomatization of fuels. As a result of the dearomatization, the quality of fuels improves tremendously. Here, solvent extraction was performed to dearomatize a feedstock sample with 20.1% aromatic and 166 ppm sulfur using acetonitrile. The extraction was performed at low temperature and ambient atmospheric pressure. The aromatic contents were determined via HPLC, while the ASTM methods were employed in other parameters determination. The results showed 72% minimum yield, 8.6% aromatic content, 58-64 cetane index, 73.2 ppm sulfur content, 5.4 viscosity, RI 1.4535, aniline point 82.15, specific gravity 0.824-0.812 with API 40.32-42.88 and flash point 70-78A degrees C. The boiling range of the produced diesel fraction raffinate (172-373A degrees C) that corresponds to C-8-C-24 cuts render it a potential candidate for other petrochemical applications.