Biotechnology Progress, Vol.34, No.4, 967-972, 2018
High Solid Fed-Batch Butanol Fermentation with Simultaneous Product Recovery: Part II-Process Integration
In these studies, liquid hot water (LHW) pretreated and enzymatically hydrolyzed Sweet Sorghum Bagasse (SSB) hydrolyzates were fermented in a fed-batch reactor. As reported in the preceding paper, the culture was not able to ferment the hydrolyzate I in a batch process due to presence of high level of toxic chemicals, in particular acetic acid released from SSB during the hydrolytic process. To be able to ferment the hydrolyzate I obtained from 250 g L-1 SSB hydrolysis, a fed-batch reactor with in situ butanol recovery was devised. The process was started with the hydrolyzate II and when good cell growth and vigorous fermentation were observed, the hydrolyzate I was slowly fed to the reactor. In this manner the culture was able to ferment all the sugars present in both the hydrolyzates to acetone butanol ethanol (ABE). In a control batch reactor in which ABE was produced from glucose, ABE productivity and yield of 0.42 g L-1 h(-1) and 0.36 were obtained, respectively. In the fed-batch reactor fed with SSB hydrolyzates, these productivity and yield values were 0.44 g L-1 h(-1) and 0.45, respectively. ABE yield in the integrated system was high due to utilization of acetic acid to convert to ABE. In summary we were able to utilize both the hydrolyzates obtained from LHW pretreated and enzymatically hydrolyzed SSB (250 g L-1) and convert them to ABE. Complete fermentation was possible due to simultaneous recovery of ABE by vacuum. (C) 2018 American Institute of Chemical Engineers