In the present work, two different impingement/effusion geometries have been investigated, both having staggered hole configuration and an equal number of impingement and effusion holes. The first geometry, which is designed in case of low coolant availability, has impingement hole pitch-to-diameter ratios of 10.5 in both orthogonal directions, a jet-to-target plate spacing of 6.5 hole diameters, with effusion holes inclined of 20 degrees with respect to the target surface. The second geometry, which is designed in case of high coolant availability, has impingement hole pitch-to-diameter ratios of 3.0, a jet-to-target plate spacing of 2.5 diameters and normal effusion holes. For each geometry, two relative arrangements between the impingement and effusion holes have been investigated, as well as various Reynolds numbers for the sparser geometry. The experimental investigation has been performed by applying a transient technique, using narrow band thermochromic liquid crystals (TLCs) for surface temperature measurement. A CFD analysis has also been performed in order to support interpretation of the results. Results show unique heat transfer patterns for every investigated geometry. Weak jet-jet interactions have been recorded for the sparser array geometry, while intense secondary peaks and a complex heat transfer pattern are observed for the denser one, which is also strongly influenced by the presence and position of effusion holes. For both the geometries, effusion holes increase heat transfer with respect to impingement-only, which can be mainly attributed to a reduction in flow recirculation for the sparser geometry and to the suppression of spent coolant flow for the denser one. (C) 2018 Elsevier Ltd. All rights reserved.