Consumption of the fossil fuels causes greenhouse gas effect and environmental pollution, which are two basic problems of our age. As a result of this problem, clean and renewable alternative energy sources are beginning to replace fossil fuels. Nowadays, the use of hydrogen energy, which is one of the clean energy, is increasing in transportation and industrial areas. Increasing of hydrogen energy usage, scientists are attempting to solve the many safety problems (such as fire, burst, impact and hydrogen embrittlement) that can occur during the storage and consumption of hydrogen energy. In this study, during the event of fire, the safety of metallic Type I pressure hydrogen storage tanks is investigated by using a novel approach. In this new approach, the mechanical strength drops of the tank materials that is related with temperature rising are added to the safety calculations. In the study, 6061 T6 aluminum and SS 316L stainless steel alloys were used as hydrogen tank material. The safety of hydrogen tanks modelled using these alloys was investigated under different temperature conditions (22, 100, 200 and 300 degrees C) and internal pressure (15, 20 and 25 MPa). (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.