Dual atmosphere conditions have been shown to be detrimental for the ferritic stainless steel interconnects used in solid oxide fuel cells (SOFC) under certain conditions. In the present work, we analyze the influence of pre-oxidation on corrosion resistance in dual atmosphere with regard to two parameters: the pre-oxidation time and the pre-oxidation location (pre-oxidation layer on the air-facing side or the hydrogen-facing side). The steel AISI 441 is investigated and pre-oxidation is achieved in air at 800 degrees C. To examine the influence of pre-oxidation time on corrosion behavior, five different pre-oxidation times are used: 0, 11, 45, 180, and 280 min. The samples are exposed discontinuously to dual atmosphere for 1000 h at 600 degrees C. Photographs, taken throughout the exposure, show that the pre-oxidation time correlates with the onset of breakaway corrosion. To analyze the influence of pre-oxidation location on corrosion behavior, the samples are pre-oxidized for 180 min, and then a pre-oxidation layer is removed from one side of the sample. Subsequent dual atmosphere exposure at 600 degrees C for 500 h shows that the pre-oxidation layer on the hydrogen-facing side is more important for corrosion resistance in dual atmosphere than the pre-oxidation layer on the air-facing side. (C) 2018 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.