The microscopic wetting behavior of a water film on the line-patterned surface of a polyelectrolyte brush was directly visualized using an optical microscope by dyeing procedures. Surface line patterns of 5 and 5 mu m width or 10 and 5 mu m width for the polyelectrolyte brush and hydrophobic monolayer, respectively, were prepared by a photolithography process, chemical vapor adsorption method, and surface-initiated polymerization. A droplet of water containing dye was placed on the line-patterned surface. In front of the contact line, a water film with a nanometer-scale thickness, referred to as a precursor film, elongated along the polymer brush line with time. The elongation velocity at the first stage increased as the brush line width increased. On the other hand, at the second stage after the macroscopic contact line stopped moving, the precursor film continued to elongate in proportion to the 0.6 power of time, independent of the brush thickness, line width, and droplet volume.