Korean Chemical Engineering Research, Vol.57, No.1, 111-117, February, 2019
코어/쉘 구조의 나노입자 제조 및 증착 공정을 활용한 염료감응 태양전지
Dye-sensitized Solar Cells Utilizing Core/Shell Structure Nanoparticle Fabrication and Deposition Process
E-mail:
초록
기상으로 전달된 Ti 전구체가 열 플라즈마에서 고순도의 결정질 코어-TiO2로 합성됨과 동시에 기판에 바로 증착시킬 수 있는 공정을 제시한다. 제조된 코어-TiO2는 외부에 노출되지 않는 상태에서 원자층증착법(Atomic Layer Deposition, ALD)에 의하여 Al2O3로 코팅된다. 코어-TiO2와 코팅된 쉘-Al2O3의 형태학적 특징은 transmission electron microscope (TEM) 및 transmission electron microscope - energy dispersive spectroscopy (TEM-EDS)를 통해 분석하였다. 제조된 코어-TiO2/쉘-Al2O3 나노입자의 전기적 특성은 염료감응 태양전지(dye-sensitized solar cell, DSSC)의 작동 전극에 적용하여 평가하였다. Dynamic light scattering system (DLS), scanning electron microscope (SEM), X-ray Diffraction (XRD)을 통하여 코어-TiO2의 평균입도, 성장속도 및 결정구조의 무게분율을 분석한 결과, 평균입도는 17.1 nm, 코어박막의 두께는 20.1 μm이고 주 결정구조가 Anatase로 증착된 코어-TiO2/쉘-Al2O3 나노입자를 적용한 DSSC가 기존의 페이스트 방식으로 제작한 DSSC보다 더 높은 광효율을 보여준다. 기존의 페이스트방식을 활용한 DSSC의 에너지변환효율 4.99%에 비하여 선택적으로 조절된 코어-TiO2/쉘-Al2O3 나노입자를 작동전극으로 사용한 경우가 6.28%로 26.1% 더 높은 광효율을 보여준다.
This study proposed the fabrication and deposition of high purity crystalline core-TiO2/shell-Al2O3 nanoparticles. Morphological properties of core-TiO2 and coated shell-Al2O3 were confirmed by transmission electron microscope (TEM) and transmission electron microscope - energy dispersive spectroscopy (TEM-EDS). The electrical properties of the prepared core-TiO2/shell-Al2O3 nanoparticles were evaluated by applying them to a working electrode of a Dye-Sensitized Solar Cell (DSSC). The particle size, growth rate and the main crystal structure of core-TiO2 were analyzed through dynamic light scattering system (DLS), scanning electron microscope (SEM) and X-ray diffraction (XRD). The core-TiO2, which has a particle size of 17.1 nm, a thin film thickness of 20.1 μm and a main crystal structure of anatase, shows higher electrical efficiency than the conventional paste-based dye-sensitized solar cell (DSSC). In addition, the energy conversion efficiency (6.28%) of the dye-sensitized solar cell (DSSC) using the core-TiO2/shell- Al2O3 nanoparticles selectively controlled to the working electrode is 26.1% higher than the energy conversion efficiency (4.99%) of the dye-sensitized solar cell (DSSC) using the conventional paste method.
Keywords:Core/shell nanoparticle;Nanoparticle Fabrication;Nanoparticle deposition;Microwave Plasma;Dye-sensitized solar cell
- O’Regan B, Gratzel M, Nature, 353, 737 (1991)
- Gratzel M, Inorg. Chem., 44(20), 6841 (2005)
- Lee DY, Chung CW, Korean Chem. Eng. Res., 47(1), 105 (2009)
- Park NG, Korean J. Chem. Eng., 27(2), 375 (2010)
- Chen HW, Hsu CY, Chen JG, Lee KM, Wang CC, Huang KC, Ho KC, J. Power Sources, 195(18), 6225 (2010)
- Kong FT, Dai SY, Wang KJ, Adv. Optoelectron., 1- 13(2007).
- Kongkanand A, Martinez-Dominguez R, Kamat PV, Nano. Letters, 7(3), 676 (2007)
- Brown P, Takechi K, Kamat PV, J. Phys. Chem. C, 112(12), 4776 (2008)
- Yen CY, Lin YF, Liao SH, Weng CC, Huang CC, et al., Nanotechnology, 19, 1 (2008)
- Yang CH, Chen HL, Chen CP, Liao SH, Hsiao HA, Chuang YY, Hsu HS, Wang TL, Shieh YT, Lin LY, Tsai YC, J. Electroanal. Chem., 631(1-2), 43 (2009)
- Waita SM, Aduda BO, Mwabora JM, Granqvist CG, Lindquist SE, Niklasson GA, Hafeldt A, Boschloo G, J. Electroanal. Chem., 605(2), 151 (2007)
- Dhungel SK, Park JG, Renew. Energy, 35(12), 2776 (2010)
- Yoo B, Kim KJ, Bang SY, Ko MJ, Kim K, Park NG, J. Electroanal. Chem., 638(1), 161 (2010)
- Paulsson H, Kloo L, Hagfeldt A, Boschloo G, J. Electroanal. Chem., 586(1), 56 (2006)
- Parvez MK, Yoo GM, Kim JH, Ko MJ, Kim SR, Chem. Phys. Lett., 495(1-3), 69 (2010)
- Villanueva-Cab J, Oskam G, Anta JA, Sol. Energy Mater. Sol. Cells, 94(1), 45 (2010)
- Meng LJ, Ren T, Li C, Appl. Surf. Sci., 256(11), 3676 (2010)
- Ganapathy V, Karunagaran B, Rhee SW, J. Power Sources, 195(15), 5138 (2010)
- Hong YC, Kim JH, Bang CU, Uhm HS, Jpn. J. Appl. Phys., 46(9), 6027 (2007)
- Lee Y, Kang M, Mater. Chem. Phys., 122(1), 284 (2010)
- Wu JH, Xie GX, Lin JM, Lan Z, Huang ML, Huang YF, J. Power Sources, 195(19), 6937 (2010)
- Tang ZY, Wu JH, Li QH, Lan Z, Fan LG, Lin JM, Huang ML, Electrochim. Acta, 55(17), 4883 (2010)
- Lee Y, Chae J, Kang M, J. Ind. Eng. Chem., 16(4), 609 (2010)