Applied Surface Science, Vol.469, 298-304, 2019
CoGe surface oxidation studied using X-ray photoelectron spectroscopy
Cobalt germanides have been widely studied as semiconductor contact materials, but recent theoretical studies suggest that they may also be excellent catalysts for methane steam reforming with stabilities and activities comparable to more expensive noble metal catalysts. We have sputter deposited CoGe alloy films and characterized their structure and morphology after post-deposition annealing in high vacuum up to 1000 degrees C. We used X-ray photoelectron spectroscopy to study the initial oxidation of amorphous and crystalline CoGe alloy surfaces under low pressures of O-2 and H2O. The oxidation rate in O-2 was found to be faster for an amorphous CoGe surface compared to a crystalline surface. We also found that there was little difference in the oxidation rate in H2O for either amorphous or crystalline surfaces. During O-2 oxidation, the crystalline surface preferentially forms GeO and the amorphous surface preferentially forms GeO2. We have also observed preferential oxidation of Ge in the CoGe thin films. During temperature programmed desorption studies, we found that GeO desorption begins near 350 degrees C and that GeO2 decomposes to GeO and desorbs near 700 degrees C. More studies of CoGe catalysts are warranted, however GeO desorption may be a concern under reaction conditions when the film is subjected to an oxidizing environment.
Keywords:Cobalt germanium;Oxidation;X-ray photoelectron spectroscopy;X-ray diffraction;Atomic force microscopy;Temperature programmed desorption