The aim of this research was to investigate the effect of rapeseed oil concentration (1-3% w/w) on the water vapor, oxygen and carbon dioxide permeability, water vapor sorption and surface properties of whey protein isolate emulsion-based films. The water contact angle as affected by oil content, film side and time was analyzed. The effect of temperature (5 and 25 degrees C) on the water vapor permeability (WVP), water vapor sorption kinetics and diffusion coefficient was also studied. The results showed that the incorporation of a lipid phase to whey protein film-forming solutions was able to decrease the WVP, water hydrophilicity (increasing water contact angle) and water transfer of whey protein films. However, the films containing oil were more permeable to oxygen and carbon dioxide. Significantly higher values of WVP and diffusion coefficient were obtained at 5 degrees C than at 25 degrees C, indicating that storage temperature should be taken into account when designing the composition of edible films and coatings for food applications. POLYM. ENG. SCI., 59:E375-E383, 2019. (c) 2018 Society of Plastics Engineers