In this work, carbon black (CB) is added in small amounts (3-10% w/w) to green aqueous dispersions based on sodium oleate, guar gum, sodium hyaluronate, or hydroxypropyl cellulose gels to enhance their stability against mechanical and thermal stresses and to provide electric responsiveness to an external voltage. Rheology, optical microscopy, small angle X-ray scattering, and conductivity measurements are performed to compare the properties of CB-enriched formulations to those of pristine dispersions. Our results demonstrate that even small amounts of CB are able to confer interesting physicochemical properties to these formulations: a remarkable increase in the viscosity of at least 1 order of magnitude is observed for all systems even at high temperature (up to 60 degrees C) upon CB addition, indicating that carbonaceous particles play a structuring role for the polymeric network. Furthermore, the application of an external voltage of 30 V for 60 min to CB-containing formulations imparts a significant electric responsiveness to the systems, allowing the modification of their rheological behavior. The CB-loaded formulations can be recycled at least three times. All these results suggest that CB can be effectively used as an alternative green additive to enhance the mechanical and thermal stabilities of the formulations and that its addition can be a feasible way to easily tune the properties of viscoelastic materials, thereby avoiding the use of toxic or potentially dangerous chemicals. The possibility of achieving remote control of mechanical and thermal properties of viscoelastic formulations significantly expands the horizon of their potential applications, for example, in the field of shale gas extraction.