Density has been reported to binary mixtures (552 points) of dibutyl ether (DBE) + heptane in the composition range (4 compositions; 0.325 <= dibutyl ether mole fraction x <= 0.85), between 298.15,393.15 K, and for 23 pressures ranging from 0.1 MPa to 140 MPa. These experimental measurements were carried out using an apparatus, comprising a vibrating tube densimeter Anton Paar, calibrated with an uncertainty of about 0.7 kg. m-3. The volumetric behavior and excess molar volume of DBE + heptane were modeled using PC-SAFE equation. The PC-SAFT parameters of DBE and heptane were optimized using experimental density data at atmospheric pressure. The density of the mixture was reasonably well predicted, with a mean relative difference between 0.0009% and 1.99%. Whereas the excess molar volume not satisfactorily predicted. A Tait equation was used to adjust the experimental density data. In addition, from this equation the isobaric thermal expansion and the isothermal compressibility were derived. (C) 2019 Published by Elsevier B.V.