화학공학소재연구정보센터
Journal of Chemical Thermodynamics, Vol.135, 107-115, 2019
P rho T measurements and modelling of (n-decane plus m-xylene) mixtures from 293.15 K to 363.15 K at pressures up to 60 MPa
In this work, the experimental measurements for liquid densities of n-decane and m-xylene binary mixtures were performed over the entire composition range with a high-pressure vibrating-tube densimeter. The range of temperatures for the present measurements was from 293.15 K to 363.15 K and the pressures were up to 60 MPa. The combined expanded uncertainty of the density measurements is estimated to be 0.001 rho with 0.95 confidence. Experimental density values were correlated by the modified Tammann-Tait equation. The simplified Perturbed Associating Fluid Theory (sPC-SAFT) and Cubic Plus Associated (CPA) equations of state (EoS) were applied to predict the densities of n-decane and m-xylene and their mixtures. Reasonably results were observed between the experimental data and calculated results for the two equations, and the deviation is less than 0.48% and 0.89% with sPC-SAFT and CPA EoS, respectively. In addition, excess molar volumes were determined from the experimental density data as well as from sPC-SAFT and CPA models. The effects of pressure and temperature on the excess molar volume were also discussed. (C) 2019 Elsevier Ltd.