Nanocrystalline-nanoporous Ni oxide is of much interest for gas sensors and other applications. Reactive advanced gas deposition (AGD) stands out as a particularly promising technique for making thin films of this material owing to the techniques ability to separate between the growth of individual nanoparticles and their subsequent deposition to create a consolidated material on a substrate. Here we report on the characterization of Ni oxide films, made by reactive AGD, by several methods. X-ray diffractometry showed that the films had a face centered cubic NiO structure, and scanning electron microscopy indicated a compact nanoparticulate composition. X-ray photoelectron spectroscopy showed the presence of Ni3+ and demonstrated that these states became less prominent upon heat treatment in air. Extended x-ray absorption fine structure analysis elucidated the local atomic structure; in particular, data on interatomic distances and effects of annealing on local disorder showed that the Ni oxide nanoparticles crystallize upon annealing while maintaining their nanoparticle morphology, which is a crucial feature for reproducible fabrication of Ni oxide thin films for gas sensors. Importantly, several techniques demonstrated that grain growth remained modest for annealing temperatures as high as 400 degrees C for 1700-nm-thick films. The present article is a sequel to an earlier one [U. Cindemir et al., Sensors and Actuators B 242 (2017) 132-139] in which we reported on fluctuation-enhanced and conductometric gas sensing with Ni oxide films prepared by AGD.