A simple phase-inversion method is employed to achieve anode-supported micro-tubular solid oxide fuel cells based on BaZr0.1Ce0.7Y0.1Yb0.1O3-delta proton conducting electrolyte. The whole-cell configuration is Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-delta vertical bar BaZr0.1Ce0.7Y0.1Yb0.1O3-delta vertical bar La0.75Sr0.25MnO3-delta-Sm0.2Ce0.8O2-delta. The novel asymmetric structure of "sponge-like micro-pores electrode vertical bar homogeneous porous functional layer" is obtained. The results achieved in the present work include: i) the electrodes reveal the single phase collected by the powder X-Ray Diffractometer analysis; ii) the single cell exhibits uniform distribution of micro sponge-like pores electrodes are well-adhered to the dense, crack-free 12 mu m thick electrolyte layer observed by Scanning Electron Microscope; iii) the cells show excellent electrochemical performance with the maximum power densities of 1.01, 0.89, 0.75 and 0.58 W.cm(-2) at 750, 700, 650 and 600 degrees C, respectively, characterized by Electrochemical Impedance Spectroscopy; iv) the cell design especially reveal very low concentration polarization values (0.014-0.019 Omega.cm(2) at 750-600 degrees C).