화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.43, No.5, 680-686, September, 2019
DOI10.7317/pk.2019.43.5.680  Export Citation
PP/MWCNT 나노복합재료의 물성에 미치는 마스터 배치의 영향에 관한 연구
Study on Effect of Master Batch on the Physical Properties of PP/MWCNT Nanocomposites
박주용, 김동학, 손영곤1, †
  • 순천향대학교 나노화학공학과
  • 1공주대학교 신소재공학부
Juyong Park, Dong Hak K, and Younggon Son1, †
  • Dept. of Chemical Engineering, Soonchunhyang University, 22, Soonchunhyang-ro, Asan, Chungnam 31538, Korea
  • 1Division of Advanced Materials Science and Engineering, College of Engineering, Kongju National University, Cheonan, Chungnam 331717, Korea
E-mail:
초록
Polypropylene/multi-walled carbon nanotube(PP/MWCNT) 나노복합재료를 제조할 때 마스터 배치(MB)의 사용 효과에 대하여 고찰하였다. PP와 MWCNT를 한 번에 압출하여 제조한 나노복합재료와 PP에 고농도의 MWCNT를 혼합하여 MB를 제조한 후 여기에 PP를 혼합하는 두 단계의 압출을 통하여 제조한 나노복합재료를 비교하였다. 두 단계로 압출하는 것이 한 단계의 압출보다 MWCNT의 분산이 우수하고 높은 기계적 강도 및 전기적 특성을 보임을 알 수 있었다. 또한 MB 제조 시 MWCNT와 동일한 양의 PP-g-MA(maleic anhydride grafted PP)를 첨가하여 만든 MB를 사용하면 더욱 우수한 물성을 가진 나노복합재료를 얻을 수 있었다. 이는 극성이 낮은 PP에 극성이 높은 PP-g-MA를 혼합함으로써 MWCNT와의 친화성을 높이기 때문인 것으로 분석되었다. MB 제조 시 사용되는 PP의 점도가 낮을수록 균일한 MWCNT의 분산을 얻을 수 있었고 기계적 물성 및 전기 전도도가 증가하였다.
Effect of masterbatch (MB) on the properties of polypropylene/multi-walled carbon nanotube (PP/MWCNT) nanocomposites was studied. Nanocomposites with same compositions but different fabrication protocols were compared. In one-step mixing protocol, PP and MWCNT were compounded at once. In two-step mixing protocol, MB was first prepared from PP and high concentration of MWCNT and followed by subsequent dilution process with additional PP and MB. It was found that two-step protocol using MB enhanced the dispersion of MWCNTs and consequently mechanical and electrical properties were improved. When the MB was fabricated by PP, MWCNT and polypropylene-g-maleic anhydride (PP-g-MA), the properties of resulting nanocomposites were higher than those without PP-g-MA. This is attributed to increased affinity between matrix polymer and MWCNT due to the increased polarity of matrix polymer by incorporation of PP-g-MA. When PP of lower viscosity was used for the MB, the dispersion of MWCNT was much enhanced and the mechanical and electrical properties were also increased.
Keywords:polypropylene;carbon nanotube;master batch;viscosity effect;polypropylene-g-maleic anhydride
  1. Sengupta R, Bhattacharya M, Bandyopadhyay S, Bhowmick AK, Prog. Polym. Sci, 36, 638 (2011)
  2. Mack JJ, Viculis LM, Ali A, Luoh R, Yang GL, Hahn HT, Ko FK, Kaner RB, Adv. Mater., 17(1), 77 (2005)
  3. Zheng WG, Wong SC, Sue HJ, Polymer, 43(25), 6767 (2002)
  4. Xiao P, Xiao M, Gong KC, Polymer, 42(11), 4813 (2001)
  5. Yasmin A, Luo JJ, Daniel IM, Compos. Sci. Technol., 66, 1182 (2006)
  6. Kotov NA, Dekany I, Fendler JH, Adv. Mater., 8(8), 637 (1996)
  7. Blunk R, Elhamid MHA, Lisi D, Mikhail Y, J. Power Sources, 156(2), 151 (2006)
  8. Du L, Jana SC, J. Power Sources, 172(2), 734 (2007)
  9. Heo SI, Oh KS, Yun JC, Jung SH, Yang YC, Han KS, J. Power Sources, 171(2), 396 (2007)
  10. Song LN, Xiao M, Li XH, Meng YZ, Mater. Chem. Phys., 93(1), 122 (2005)
  11. Song LN, Xiao M, Meng YZ, Compos. Sci. Technol., 66, 2156 (2006)
  12. Chen GH, Weng WG, Wu DJ, Wu CL, Eur. Polym. J., 39, 2329 (2003)
  13. Uhl FW, Yao Q, Nakajima H, Manias E, Wilkie CA, Polym. Degrad. Stabil., 89, 70 (2005)
  14. Shen JW, Chen XM, Huang WY, J. Appl. Polym. Sci., 88(7), 1864 (2003)
  15. Pan YX, Yu ZZ, Ou YC, Hu GH, J. Polym. Sci. B: Polym. Phys., 28, 1626 (2000)
  16. Zhang W, Dehghani-Sanij AA, Blackburn RS, J. Mater. Sci., 42(10), 3408 (2007)
  17. Socher R, Krause B, Muller MT, Boldt R, Potschke P, Polymer, 53(2), 495 (2012)
  18. Yao DG, Chen SC, Kim BH, Adv. Polym. Technol., 27(4), 233 (2008)
  19. Bauhofer W, Kovacs JZ, Compos. Sci. Technol., 69, 1486 (2009)
  20. Villmow T, Pegel S, Potschke P, Wagenknecht U, Compos. Sci. Technol., 68, 777 (2008)
  21. Abbasi S, Carreau PJ, Derdouri A, Polymer, 51(4), 922 (2010)
  22. Rueda MM, Auscher M, Fulchiron R, Perie T, Martin G, Sonntag P, Cassagnau P, Prog. Polym. Sci, 66, 22 (2017)
  23. Cruz H, Son Y, J. Nanosci. Nanotechnol., 18, 943 (2018)
  24. Galgali G, Ramesh C, Lele A, Macromolecules, 34(4), 852 (2001)
  25. Ma PC, Siddiqui NA, Marom G, Kim JK, Composites Part A, 41, 1345 (2010)
  26. Du FM, Scogna RC, Zhou W, Brand S, Fischer JE, Winey KI, Macromolecules, 37(24), 9048 (2004)
  27. Alig I, Potschke P, Lellinger D, Skipa T, Pegel S, Kasaliwal GR, Villmow T, Polymer, 53(1), 4 (2012)
  28. Yuen S, Ma C, Chuang C, Yu K, Wu S, Yang C, Wei M, Compos. Sci. Technol., 68, 963 (2008)
  29. Mayoral B, Lopes J, McNally T, Macromol. Mater. Eng., 299, 609 (2014)