화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.30, No.3, 111-116, March, 2020
Effect of Casting Speed on Microstructure and Mechanical Properties of Al-Mg-Si/Al Hybrid Material by Duo-Casting
E-mail:
Two different casting speeds of 60 and 80mm/min are adopted to determine the effect of casting speed on the microstructure and mechanical properties of Al-Mg-Si/Al hybrid material prepared by duo-casting. The obtained hybrid material has a uniform and straight macro-interface between the pure Al side and the Al-Mg-Si alloy side at both casting speeds. When the casting speed is increased to 80mm/min, the size of primary α phases in Al-Mg-Si alloy decreases, without change of shape. Although the Al-Mg-Si alloy produced at higher casting speed of 80mm/min shows much higher ultimate tensile strength (UTS) and 0.2 % proof stress and lower elongation, along with higher bending strength compared to the case of the 60mm/min in casting speed, the tensile properties and bending strength of the hybrid material, which are similar to those of pure Al, are the same regardless of the increase of casting speed. Despite the different casting speeds, deformation and fracturing in hybrid materials are observed only on the pure Al side. This indicates that the macro-interface is well-bonded, allowing it to endure tensile and bending deformation in all hybrid materials.
  1. Chang SY, Cho SJ, Hong SK, Shin DH, J. Alloy. Compd., 316, 275 (2001)
  2. Chang SY, Kim YK, Hong SK, Shin DH, Mater. Trans., 42, 1035 (2001)
  3. Chang SY, Cho HG, Kim YD, J. Korean Powder Metall. Inst., 14, 1 (2007)
  4. Lee SH, Lee GJ, Korean J. Mater. Res., 21(12), 655 (2011)
  5. Manesh HD, Taheri AK, Mech. Mater., 37, 531 (2005)
  6. Yilmaz O, Celik H, J. Mater. Process. Technol., 141, 67 (2003)
  7. Kacar R, Acarer M, J. Mater. Process. Technol., 152, 91 (2004)
  8. Kazanowski P, Epler ME, Misiolek WZ, Mater. Sci. Eng., 369, 170 (2004)
  9. Dingfa F, Honglong N, Zenhua C, Ordnance Mater. Sci. Eng., 24, 65 (2001)
  10. Jianbo S, Jun L, Zhiming Y, Zhiquiang C, Tingju L, in Proceedings of the 6th International Conference on Electromagnetic Processing of Materials, p595 Dresden, Germany, October (2009).
  11. Han JM, Kim CH, Park JP, Chang SY, J. Korea Foundry Soc., 32, 269 (2012)
  12. Park SJ, Li T, Kim CH, Park JP, Chang SY, Korean J. Mater. Res., 22(2), 97 (2012)
  13. Suh JY, Park SJ, Kwon DK, Chang SY, Korean J. Mater. Res., 28(9), 499 (2018)
  14. Peng JH, Tang XL, He JT, Xu DY, Trans. Nonferrous Met. Soc. China, 21, 1950 (2011)
  15. Suh JY, Park SJ, Lee HK, Chang SY, Korean J. Mater. Res., 30(2), 51 (2020)