In this work, we achieve a sub-breakdown electric field measurement in a premixed stagnation flame by electric-field-induced second-harmonic generation (ESHG) using a nanosecond laser. Under the application of a DC voltage, the premixed flame can transit from a flat substrate-stabilized mode to a conical nozzle-stabilized mode due to the two-way interaction between the electric and hydrodynamic responses of the flame. The average electric fields along the laser pathway for these two flame modes are measured at different heights above the burner. Combining the measurement and the numerical simulation of a charge transport model, we further elucidate that the flame affects the electric field distribution in two different ways. For the flat flame mode, the electric field strength is shielded at the flame front and then quickly increases both upstream and downstream, reaching the maximum at the electrodes. The charge transport model reveals that the electrostatic shielding effect of the flame front can be attributed to the charge redistribution in the chemi-ionized conductive layer. For the conical flame mode, the electric field strength has a large gradient near the conical tip and remains almost zero downstream. The conical flame front then serves as a conductive layer to guide the charge transport under the application of the electric field. The positive and negative charges are separated at different radial positions because of the inclined asymmetric flame front. Thus, the largest electric field gradient is generated upstream of the flame conical tip, where the net charge and the electric body force maximize and create a virtual flame stabilization mode. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.