International Journal of Hydrogen Energy, Vol.45, No.12, 7374-7385, 2020
Stability of pore-plated membranes for hydrogen production in fluidized-bed membrane reactors
Pd-based membranes prepared by pore-plating technique have been investigated for the first time under fluidization conditions. A palladium thickness around 20 mu m was achieved onto an oxidized porous stainless steel support. The stability of the membranes has been assessed for more than 1300 h in gas separation mode (no catalyst) and other additional 200 h to continuous fluidization conditions. Permeances in the order of 5.10(-7) mol s(-1) m(-2) Pa-1 have been obtained for temperatures in a range between 375 and 500 degrees C. During fluidization, a small decrease in permeance is observed, as consequence of the increased external (bed-to-wall) mass transfer resistances. Moreover, water gas shift (WGS) reaction cases have been carried out in a fluidized bed membrane reactor. It has been confirmed that the selective H-2 separation through the membranes resulted in CO conversions beyond the thermodynamic equilibrium (of conventional systems), showing the benefits of membrane reactors in chemical conversions. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.