In the present study, we demonstrate co-deposition of titanium and vanadium from a eutectic LiCl-KCl electrolyte enriched with VCl3 and TiCl2 at 700 K. While the addition of metallic titanium to the electrolyte caused vanadium depletion by a displacement reaction, metallic vanadium addition created and stabilized divalent vanadium ions in the melt, which are supposed to positively affect the deposition process. Various electrochemical experiments were carried out with different electrolyte concentrations, and a relationship between applied potential, electrolyte concentration and composition of the deposit was established. The composition and the morphology of the obtained deposits were strongly affected by the electrolysis conditions. Electrodeposited vanadium-rich Ti-V alloys were found to grow as dendrites, whereas the titanium-rich alloys exhibited a dense cauliflower-like surface morphology. In contrast to deposits of the single elements, which are composed of comparably large faceted crystals, the Ti-V alloys obtained in this study were very fine grained, especially those with vanadium contents around 10-15 at%. Transmission electron microscopy revealed that, depending on the composition of the deposit, either a biphasic alpha + beta microstructure in the case of low vanadium contents or beta-(V,Ti) with small amounts of omega phase for high vanadium contents were found. Graphic abstract