화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Materials Research, Vol.30, No.5, 231-238, May, 2020
DOI10.3740/MRSK.2020.30.5.231  Export Citation
분말야금법으로 제작한 NiAl합금의 기계적성질 및 형상기억특성
Mechanical Properties and Shape Memory Characteristics of NiAl Alloys by Powder Metallurgy
한창석†, 진성윤, 권혁구1
  • 호서대학교 자동차ICT공학과
  • 1호서대학교 환경공학과
Chang-Suk Han†, Sung-Yooun Jin, and Hyuk-Ku Kwon1
  • Dept. of ICT Automotive Engineering, Hoseo University, 201, Sandan7-ro, Seongmun-myeon, Dangjin City, Chungnam 31702, Republic of Korea
  • 1Dept. of Environmental Engineering, Hoseo University, 20, Hoseo-ro 79beon-gil, Baebang-eup, Asan City, Chungnam 31499, Republic of Korea
E-mail:
The composition of martensite transformation in NiAl alloy is determined using pure nickel and aluminum powder by vacuum hot press powder metallurgy, which is a composition of martensitic transformation, and the characteristics of martensitic transformation and microstructure of sintered NiAl alloys are investigated. The produced sintered alloys are presintered and hot pressed in vacuum; after homogenizing heat treatment at 1,273 K for 86.4 ks, they are water-cooled to produce NiAl sintered alloys having relative density of 99 % or more. As a result of observations of the microstructure of the sintered NiAl alloy specimens quenched in ice water after homogenization treatment at 1,273 K, it is found that specimens of all compositions consisted of two phases and voids. In addition, it is found that martensite transformation did not occur because surface fluctuation shapes did not appear inside the crystal grains with quenching at 1,273 K. As a result of examining the relationship between the density and composition after martensitic transformation of the sintered alloys, the density after transformation is found to have increased by about 1 % compared to before the transformation. As a result of examining the relationship between the hardness (Hv) at room temperature and the composition of the matrix phase and the martensite phase, the hardness of the martensite phase is found to be smaller than that of the matrix phase. As a result of examining the relationship between the temperature at which the shape recovery is completed by heating and the composition, the shape recovery temperature is found to decrease almost linearly as the Al concentration increases, and the gradient is about -160 K/ at% Al. After quenching the sintered NiAl alloys of the 37 at%Al into martensite, specimens fractured by three-point bending at room temperature are observed by SEM and, as a result, some grain boundary fractures are observed on the fracture surface, and mainly intergranular cleavage fractures.
Keywords:martensite transformation;NiAl alloy;homogenization treatment;shape recovery;intergranular cleavage fracture
  1. Hansen M, Anderko K, Constitution of Binary Alloys, 2nd Ed., p.118, McGraw-Hill, New York (1958).
  2. Han CS, J. Korean Soc. Heat Treatment, 20, 187 (2007)
  3. Han CS, Korean J. Met. Mater., 46, 267 (2008)
  4. Han CS, Han SO, Lee JH, J. Korean Soc. Heat Treatment, 22, 345 (2009)
  5. Oh CS, Han CS, J. Korean Soc. Heat Treatment, 26, 1 (2013)
  6. Enami K, Nenno S, Metall. Trans., 2, 1487 (1971)
  7. Rosen S, Goebel JA, Trans. Metall. Soc., AIME, 242, 722 (1968)
  8. Enami K, Nenno S, Shimizu K, Trans. Jpn. Inst. Met., 14, 161 (1973)
  9. Enami K, Martynov VV, Tomie T, Khandros LG, Nenno S, Trans. Jpn. Inst. Met., 22, 357 (1981)
  10. Lee HY, Kim TJ, Cho YJ, Korean J. Met. Mater., 47, 267 (2009)
  11. Park HS, Ko HS, Hong KT, Lee KS, Korean J. Met. Mater, 36, 691 (1998)
  12. Guo YF, Wang YS, Wu WP, Acta Mater., 55, 3891 (2007)
  13. Xu GH, Zhang KF, Huang ZQ, Adv. Powder Technol., 23(3), 366 (2012)
  14. Matsuura K, Kitamutra T, Kudoh M, J. Mater. Process. Technol., 63, 298 (1997)
  15. Imai Y, Kumazawa M, J. Japan Inst. Met., 22, 244 (1958)
  16. Imai Y, Kumazawa M, J. Japan Inst. Met., 22, 248 (1958)
  17. Litvinov VS, Zelenin LP, Shklyar RH, Fiz. Metal. Metalloved., 31, 137 (1971)
  18. Pascoe RT, Newey CW, J. Metal Sci., 2, 138 (1968)
  19. Tsujimoto T, J. Jpn. Inst. Light Metals, 36, 162 (1986)
  20. Au YK, Wayman CM, Scr. Metall., 6, 1209 (1972)
  21. Smialek JL, Hehemann RF, Metall. Trans., 4, 1571 (1973)
  22. Funami K, Sekiguchi Y, Funakubo H, J. Japan Inst. Metals., 48, 1113 (1984)
  23. Ball A, J. Met. Sci., 1, 47 (1967)
  24. Jones H, Proc. Phys. Soc., 49, 250 (1937)
  25. Enami K, Hasumuma J, Nagasawa A, Nenno S, Scr. Metall., 10, 879 (1976)
  26. Sakuma T, Mihara Y, Ochi Y, Yamauchi K, J. Japan Inst. Metals., 69, 568 (2005)
  27. Nonaka K, Kawabata T, Nakajima H, J. Japan Inst. Metals., 65, 1029 (2001)