Nanoparticles have advantageous small-size and surface effects that impart them with unique mechanical properties. To evaluate these properties, a constant-volume shear tester that can precisely measure stresses on the shear plane was used. Six samples, namely, hydrophilic and hydrophobic silica, alumina, and titania nanoparticles, were prepared for the shear tests. For each sample, a single shear test provided the void fraction, stress relaxation ratio, stress transmission ratio, powder yield locus, consolidation yield locus, critical state line, shear cohesion, and flow function. All the tests were conducted under ambient conditions using powder beds, in which the void fractions were in the range of 0.89-0.96. A series of analyses demonstrated that the hydrophilic nanoparticles have lower flowability than the hydrophobic nanoparticles, indicating that moisture on the surface increases the cohesion and inhibits the flow. (C) 2019 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. This is an open access article under the CC BY-NC-ND license (http://creativecommons. org/licenses/by-nc-nd/4.0/).