Enhancement of Yarn Pull-Out Force of Para-Aramid Fabric at High Speed by Dispersion and Phenolic Anchoring of MWCNT on the Fiber Surfaces in the Presence of Surfactant and Ultrasonic Process

Jinsil Cheon; Donghwan Cho

Macromolecular Research, Vol.28, No.9, 881-884, August, 2020

DOI10.1007/s13233-020-8122-0 Export Citation

Enhancement of Yarn Pull-Out Force of Para-Aramid Fabric at High Speed by Dispersion and Phenolic Anchoring of MWCNT on the Fiber Surfaces in the Presence of Surfactant and Ultrasonic Process

Jinsil Cheon, and Donghwan Cho^†

Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea

E-mail:

[References]

Laha A, Majumdar A, Appl. Clay Sci., 132, 468 (2016)
Carrillo JG, Gamboa RA, Flores-Johnson EA, Gonzalez-Chi PI, Polym. Test, 31, 512 (2012)
Tabiei A, Nilakantan G, Appl. Mech. Rev., 61, 010801 (2008)
Majumdar A, Butola BS, Srivastava A, Mater. Des., 51, 148 (2013)
Bazhenov S, J. Mater. Sci., 32(15), 4167 (1997)
Das S, Jagan S, Shaw A, Pal A, Compos. Struct., 120, 129 (2015)
Liable R, Ed., Ballistic Materials and Penetration Mechanics, Elsevier, Amsterdam, 1980.
Davis DC, Wilkerson JW, Zhu J, Hadjiev VG, Compos. Sci. Technol., 71, 1089 (2011)
Lee M, Koo J, Ki H, Lee KH, Min BH, Lee YC, Kim JH, Macromol. Res., 25(3), 231 (2017)
Choi EY, Nam JU, Hong SH, Kim CK, Macromol. Res., 26(2), 107 (2018)
Singh D, Singh UB, Pandey MB, Dabrowski R, Dhar R, Mater. Lett., 216, 5 (2018)
Kwon Y, Shim W, Jeon SY, Jouk JH, Yu WR, Carbon Lett., 20, 53 (2016)
Vaisman L, Wagner HD, Marom G, Adv. Colloid Interface Sci., 128-130, 37 (2006)
Bose S, Drzal LT, Carbon Lett., 6, 101 (2015)
Singh BP, Bharadwaj P, Choudhary V, Mathur RB, Appl. Nanosci., 4, 421 (2014)
Cheon J, Yoon BI, Cho D, Carbon Lett., 26, 107 (2018)

[Referenced By]

[Related Articles]

[1] Laha A, Majumdar A, Appl. Clay Sci., 132, 468 (2016)

[2] Carrillo JG, Gamboa RA, Flores-Johnson EA, Gonzalez-Chi PI, Polym. Test, 31, 512 (2012)

[3] Tabiei A, Nilakantan G, Appl. Mech. Rev., 61, 010801 (2008)

[4] Majumdar A, Butola BS, Srivastava A, Mater. Des., 51, 148 (2013)

[5] Bazhenov S, J. Mater. Sci., 32(15), 4167 (1997)

[6] Das S, Jagan S, Shaw A, Pal A, Compos. Struct., 120, 129 (2015)

[7] Liable R, Ed., Ballistic Materials and Penetration Mechanics, Elsevier, Amsterdam, 1980.

[8] Davis DC, Wilkerson JW, Zhu J, Hadjiev VG, Compos. Sci. Technol., 71, 1089 (2011)

[9] Lee M, Koo J, Ki H, Lee KH, Min BH, Lee YC, Kim JH, Macromol. Res., 25(3), 231 (2017)

[10] Choi EY, Nam JU, Hong SH, Kim CK, Macromol. Res., 26(2), 107 (2018)

[11] Singh D, Singh UB, Pandey MB, Dabrowski R, Dhar R, Mater. Lett., 216, 5 (2018)

[12] Kwon Y, Shim W, Jeon SY, Jouk JH, Yu WR, Carbon Lett., 20, 53 (2016)

[13] Vaisman L, Wagner HD, Marom G, Adv. Colloid Interface Sci., 128-130, 37 (2006)

[14] Bose S, Drzal LT, Carbon Lett., 6, 101 (2015)

[15] Singh BP, Bharadwaj P, Choudhary V, Mathur RB, Appl. Nanosci., 4, 421 (2014)

[16] Cheon J, Yoon BI, Cho D, Carbon Lett., 26, 107 (2018)