화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.38, No.3, 523-530, March, 2021
Application of polyethylenimine multi-coated adsorbent for Pd(II) recovery from acidic aqueous solution: batch and fixed-bed column studies
E-mail:
PEI multi-coated PSBF (PEI-M-PSBF) with high adsorption efficiency and good reusability for Pd(II) recovery was prepared by a PEI multi-coating method. The results of FT-IR and FE-SEM showed that the PEI-M-PSBF was successfully prepared. Batch experiments were conducted to study the adsorption/desorption performance of PEIM-PSBF to Pd(II). The Langmuir and pseudo-second-order models were well suited for the batch experiment isotherm and kinetic data, respectively. The adsorption capacity of Pd(II) by Langmuir model was 327.14mg/g, and the initial adsorption rate of 3-PEI-PSBF was 37.19mg/g min. As a result, the increase in amine groups on the PEI-MPSBF surface through the PEI multi-coating directly influenced the adsorption amount of the biosorbent. The effects of initial concentration, bed column depth, and flow rate were determined in a column system and the breakthrough curves were detected by Thomas model. In addition, the recycle of the adsorbent was examined by multiple time performing adsorption/desorption cycles up to ten times in a fixed-bed column.
  1. Ruan C, Strømme M, Lindh J, Cellulose, 23, 2627 (2016)
  2. Morcali MH, Zeytuncu B, Int. J. Miner. Process., 137, 52 (2015)
  3. Yamada M, Gandhi MR, Shibayama A, Sci. Rep., 8, 1 (2018)
  4. Ramesh A, Hasegawa H, Sugimoto W, Maki T, Ueda K, Bioresour. Technol., 99(9), 3801 (2008)
  5. Fomina M, Gadd GM, Bioresour. Technol., 160, 3 (2014)
  6. Mao J, Won SW, Vijayaraghavan K, Yun YS, Bioresour. Technol., 100(3), 1463 (2009)
  7. Yun YS, Park D, Park JM, Volesky B, Environ. Sci. Technol., 35, 4353 (2001)
  8. Vijayaraghavan K, Yun YS, Biotechnol. Adv., 26, 266 (2008)
  9. Cho Chul-Woong, Kang Su Bin, Kim Sok, Yun Yeoung-Sang, Won Sung Wook, Chem. Eng. J., 302, 545 (2016)
  10. Beolchini F, Pagnanelli F, Toro L, Veglio F, Hydrometallurgy, 70, 101 (2003)
  11. Sun C, Song G, Chen L, Ren X, Chen C, J. Colloid Interface Sci., 580, 550 (2020)
  12. Zhao F, Yang Z, Wei Z, Spinney R, Sillanpaa M, Tang J, Tam M, Xiao R, Chem. Eng. J., 388, 124307 (2020)
  13. Kwame J, Lin S, Kumar A, Zhao Y, Choi JW, Song MH, Wei W, Kumar DH, Cho CW, Yun YS, J. Clean Prod., 252, 119389 (2020)
  14. Choi HA, Park HN, Won SW, J. Environ. Manage., 204, 200 (2017)
  15. Zhao F, Repo E, Song Y, Yin D, Hammouda SB, Chen L, Kalliola S, Tang J, Tam KC, Sillanpaa M, Green Chem., 19, 4816 (2017)
  16. Bo S, Luo J, An Q, Xiao Z, Wang H, Cai W, Zhai S, Li Z, J. Clean Prod., 250, 119585 (2020)
  17. Shahbazi A, Younesi H, Badiei A, Chem. Eng. J., 168(2), 505 (2011)
  18. Kim S, Choi YE, Yun YS, J. Hazard. Mater., 313, 29 (2016)
  19. Won SW, Park J, Mao J, Yun YS, Bioresour. Technol., 102(4), 3888 (2011)
  20. Won SW, Kim S, Kotte P, Lim A, Yun YS, J. Hazard. Mater., 263, 391 (2013)
  21. Fytianos K, Voudrias E, Kokkalis E, Chemosphere, 40, 3 (2000)
  22. Gandhi MR, Yamada M, Kondo Y, Shibayama A, Hamada F, J. Ind. Eng. Chem., 30, 20 (2015)
  23. Vincent T, Parodi A, Guibal E, React. Funct. Polym., 68, 1159 (2018)
  24. Sharma S, Rajesh N, J. Environ. Chem. Eng., 5, 1927 (2017)
  25. Sharma S, Barathi M, Rajesh N, Chem. Eng. J., 259, 457 (2015)
  26. Orgul S, Atalay U, Hydrometallurgy, 67, 71 (2002)
  27. Hubicki Z, Wawrzkiewicz M, Wolowicz A, Chem. Analityczna, 53, 759 (2008)