A comprehensive study on controlled shape formation with high yield of three commercially relevant SiO2-based amorphous glasses in a stirred media mill is presented. Stressing under well-controlled conditions leads to micron-sized amorphous glass flakes with high aspect ratios. This unique result is quite contrary to the fundamental observation that comminution processes generally result in irregular shaped particles. The influences of glass composition, processing time, stirrer tip speed and grinding media size on the obtained products have been investigated. The size and shape of the obtained glass flakes have been characterized by scanning electron microscopy and atomic force microscopy. The glass flakes exhibit thicknesses as low as 155 nm while the lateral dimensions are well within the micrometer range. Our study shows that particle size reduction occurs within the first hour of grinding. Afterwards plastic deformation of the fragments, which can be accompanied by densification of the glass network, leads to the formation and further thinning of the glass flakes. To demonstrate the quality and applicability of the glass flakes interference pigments were realized by a TiO2 coating via an aqueous titration process. The presented approach offers a simple, convenient and fully scalable top-down method to produce flake-like particles from various silica glasses. The obtained flakes are suitable substrates for further modifications and applications and the process can be transferred to other materials and glasses with tailor-made chemical compositions. (C) 2020 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.