Three chain extenders, pyromellitic dianhydride (PMDA), ethylene carbonate (EC), and a polymeric-epoxide, were investigated for improving recycled p(ethylene terephthalate) (r-PET) properties with melt extrusion. The amount of additives and processing temperatures were also varied to check for melt degradation. Small amplitude oscillatory shear experiments were performed to probe rheological changes with different chain extenders. Capillary rheometry with haul-off was also performed to measure extensional viscosity and melt strength. Higher loadings of the chain extenders were found to improve properties of r-PET. These chain extenders definitely increased melt viscosities when incorporated at the higher level of the ranges examined, matching that of virgin PET. EC addition resulted in high shear thinning of the polymer. Epoxy and PMDA added to r-PET produced products with the same extensional viscosity as v-PET. Haul-off experiments demonstrate superior performance by epoxy-modified r-PET compared to v-PET.