A series of mesoporous nickel catalysts with different molar ratios of citric acid and nickel nitrate were synthesized via a simple two-step method by solid-state grinding and in-situ reduction; these catalysts were further employed for the catalytic transfer hydrogenation of levulinate esters to gamma-valerolactone (GVL) with 2-propanol as the hydrogen donor. The effects of C6H8O7/Ni molar ratios, catalyst dosage, reaction temperature and time on the catalytic performance were investigated. An excellent GVL selectivity of 99.1% and an ethyl levulinate (EL) conversion of 100% could be achieved at 180 degrees C in 6 h over Ni-1.0 catalyst with a 1.0:1 M ratio of C6H8O7/Ni. The characterization results showed that the Ni-1.0 catalyst was composed of mesoporous metallic Ni bulk and a surface Ni-NiO composite, and the acid sites of NiO played a synergistic catalytic role in producing GVL from EL. The superior mesoporous structure and large surface area of Ni-1.0 increased the atomic utilization rate of nickel metallic active centers. Moreover, Ni-1.0 catalyst could be easily separated and reused ten times, with an EL conversion above 95% remaining in each recycle. This work provids a highly efficient and environmentally friendly catalytic procedure for the conversion of biomass into GVL, a fuel additive compound. (C) 2020 Elsevier Ltd. All rights reserved.