A methodology to assess the performance of an elbow-type draft tube is outlined. This was achieved using Computational Fluid Dynamics (CFD) to evaluate the pressure recovery and mechanical energy losses along a draft tube design, while using open-source and commercial software to parameterise and regenerate the geometry and CFD grid. An initial validation study of the elbow-type draft tube is carried out, focusing on the grid-regeneration methodology, steady-state assumption, and turbulence modelling approach for evaluating the design's efficiency. The Grid Convergence Index (GCI) technique was used to assess the uncertainty of the pressure recovery to the grid resolution. It was found that estimating the pressure recovery through area-weighted averaging significantly reduced the uncertainty due to the grid. Simultaneously, it was found that this uncertainty fluctuated with the local cross-sectional area along the geometry. Subsequently, a study of the inflow cone and outer-heel designs on the flowfield and pressure recovery was carried out. Catmull-Rom splines were used to parameterise these components, so as to recreate a number of proposed designs from the literature. GCI analysis is also applied to these designs, demonstrating the robustness of the grid-regeneration methodology. (C) 2020 Elsevier Ltd. All rights reserved.