Evaporation behavior of water/solvent blends was estimated using the universal functional activity coefficient; UNIFAC, method. The evaporation rate from a free surface of a waterborne coating, WBC, containing a co-solvent was experimentally determined. These results were used to estimate the evaporation rate from wet films of a WBC containing a variety of co-solvents with a range of initial thickness. Knowing the composition of the WBC during the drying process, the change in the viscosity and the surface tension was determined. The results strongly support the development of a surface tension gradient in the film. It is also suggested that a surface tension gradient would accelerate the leveling of the ribs if a proper co-solvent were employed.