This paper reviews the technology of melt vibration (more specifically at low frequency) to reduce viscosity during processing of plastics and to enhance mechanical performance of the solidified parts. The effect of vibration frequency and amplitude on melt viscosity is explained in terms of shear-thinning criteria. The effect of pressure and temperature on shear thinning is also reviewed to predict how these variables interfere with melt vibration. Practical applications of the principles of melt vibration are provided in injection molding, extrusion and compression molding/thermoforming, from reduction of viscosity to lowering processing temperature and pressure to the elimination of melt defects and weld lines, to the enhancement of mechanical properties, stiffness and strength, by modification of the amorphous and semicrystalline texture and orientational state. Commercially available equipments are reviewed. Results showing the effect of melt vibration during processing for two classical polymers, polystyrene and polypropylene, are discussed. The paper concludes on the remaining challenges to bring the benefits of the new technology to full commercialization.