A new composite membrane was designed and studied for permselectivity of various molecular weight proteins. The membrane is composed of a porous substrate membrane [Durapore; poly(vinylidene fluoride)] coated with a thin dense layer of regenerated cellulose. This composite membrane was fabricated by spin coating a cellulose acetate solution onto the membrane, followed by alkaline hydrolysis of the cellulose acetate coating to regenerate cellulose. The coated layer was physically characterized by scanning electron microscopy (SEM) and infrared (IR) spectroscopy. In addition, the water uptake into and permeation properties of macromolecules across the coated and uncoated membranes were studied. A typical composite membrane coating was 0.8 +/- 0.2 mum thick, resulting in a molecular weight cutoff of approximately 40,000 daltons. This composite membrane also demonstrated negligible diffusional lag time for permeants, due to the thin diffusional barrier.