In the highly competitive market of commercial bakers’ yeast, fermentations are operated for maximum efficiency and minimum production cost. In order to maintain competitiveness, the fermentations must be highly consistent with minimum variation in yeast performance, maximum yield on raw materials, and minimum production of undesirable side products. The use of advanced instrumentation is of critical importance to achieving these goals by the production engineer. An in situ optical density probe was used to determine the yeast cell density in full-scale commercial bakers’ yeast fermentations. The optical density probe results were compared with oxygen uptake rate analyses, packed cell volume, and off-line measured cell dry weights. The most accurate measurement of cell density was found to be the optical density probe. This instrument allowed the on-line determination of cell density with highly consistent results from fermentation batch to batch and without the need for intermittent recalibration.