The new solutions, hydroxylamine sulfate [(NH2OH)(2)H2SO4] combined with CuSO4, for cleaning Al via were investigated. Tt is found that the cleaning capability of hydroxylamine sulfate combined with CuSO4 is better than that of hydroxylamine sulfate. Low via resistance of electrical test structure is obtained if the via is cleaned by this new cleaning solution. The hydroxylamine sulfate can efficiently remove Al3O2 and leave the clean Al on the surface of via. Then, the Cu ion in this new solution will immediately react with clean Al and form a copper passivating layer on the surface of via. The copper is more stable than aluminum in the environment and hard to be oxidized. Therefore, hydroxylamine sulfate combined with CuSO4 can provide excellent cleaning capability for aluminum via holes. Also, the clean surface on the bottom of via is helpful for tungsten nucleation in via during CVD-W deposition. Therefore, a low via resistance and good selectivity of tungsten plug are obtained when the Al via is precleaned with this new solution.