Design and Operating Experience for a Fluidized Bed Incinerator to Treat Industrial Hazardous Scum and Waste Oils

James Cheng-Hsien Chu

Korean Journal of Chemical Engineering, Vol.16, No.6, 795-797, November, 1999

DOI10.1007/BF02698354 Export Citation

Design and Operating Experience for a Fluidized Bed Incinerator to Treat Industrial Hazardous Scum and Waste Oils

James Cheng-Hsien Chu^†

Department of Environmental Engineering and Science, Science, Feng-Chia University, University, Taichung, R.O.C., Taiwan

E-mail:

The production of industrial hazardous wastes increases with population growth and industrial progress. Most industrial hazardous wastes are in the forms of sludge, scum or waste oil and have organic properties. The best way to treat those wastes is to burn them in a fluidized bed type incinerator. Because the properties of scum and waste oils are different from those of industrial sludges, the design and operation of such kinds of incinerators are also different from that for industrial sludges. This paper presents the design method and the operating experience for a fluidized bed incinerator to treat specifically industrial hazardous scum and waste oils.

Keywords:Design;Operating Experience;Fluidized Bed Incinerator;Scum;Waste Oils

[References]

Becker KP, Wall CJ, "Fluid Bed Incineration of Wastes," CEP, 61 (1976)
Brunner CR, "Hazardous Air Emission from Incineration," Chapman and Hall Ltd., New York, NY, U.S.A., 89 (1985)
Desai TB, Kamp JF, Hughes T, Kennedy E, McCormick R, Peters J, Zanders D, "Hazardous Waste Incineration Engineering," Noyes Data Co., Park Ridge, NJ, U.S.A., 13 (1981)
Howard JR, "Fluidized Bed Technology: Principles and Application," Adam Hilgar Ltd., New York, NY, U.S.A., 143 (1989)
Ioakimis EG, Davetoy AD, "Management of Oil Sludge from a Refinery Waste Water Treatment Plant," USSR-USA Joint Committee on Cooperation in the Field of Environment Protection, Moscow, USSR, 27 (1975)
Robinson WD, "The Solid Waste Handbook," John Wiley & Sons, New York, NY, U.S.A., 405 (1986)
Trethaway W, "Energy Recovery and Thermal Disposal of Wastes Utilizing Fluidized Bed Reactor Systems," Proceedings of 1976 National Waste Processing Conference, Boston, MA, U.S.A., 117 (1976)
Wentz CA, "Hazardous Waste Management," McGraw-Hill Book Co., New York, NY, U.S.A., 25 (1989)
Zenz FA, Othmer DF, "Fluidization and Fluid-Particle Systems," Reinhold Publishing Co., New York, NY, U.S.A., 25 (1960)
"Incineration Manual of Practice," Water Pollut. Control Fed., Al-exandria, VA., U.S.A., 39 (1988)

[Referenced By]

[1] Becker KP, Wall CJ, "Fluid Bed Incineration of Wastes," CEP, 61 (1976)

[2] Brunner CR, "Hazardous Air Emission from Incineration," Chapman and Hall Ltd., New York, NY, U.S.A., 89 (1985)

[3] Desai TB, Kamp JF, Hughes T, Kennedy E, McCormick R, Peters J, Zanders D, "Hazardous Waste Incineration Engineering," Noyes Data Co., Park Ridge, NJ, U.S.A., 13 (1981)

[4] Howard JR, "Fluidized Bed Technology: Principles and Application," Adam Hilgar Ltd., New York, NY, U.S.A., 143 (1989)

[5] Ioakimis EG, Davetoy AD, "Management of Oil Sludge from a Refinery Waste Water Treatment Plant," USSR-USA Joint Committee on Cooperation in the Field of Environment Protection, Moscow, USSR, 27 (1975)

[6] Robinson WD, "The Solid Waste Handbook," John Wiley & Sons, New York, NY, U.S.A., 405 (1986)

[7] Trethaway W, "Energy Recovery and Thermal Disposal of Wastes Utilizing Fluidized Bed Reactor Systems," Proceedings of 1976 National Waste Processing Conference, Boston, MA, U.S.A., 117 (1976)

[8] Wentz CA, "Hazardous Waste Management," McGraw-Hill Book Co., New York, NY, U.S.A., 25 (1989)

[9] Zenz FA, Othmer DF, "Fluidization and Fluid-Particle Systems," Reinhold Publishing Co., New York, NY, U.S.A., 25 (1960)

[10] "Incineration Manual of Practice," Water Pollut. Control Fed., Al-exandria, VA., U.S.A., 39 (1988)