화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.11, No.8, 816-820, December, 2000
Sr(1-x)(Ba, La)(x)Fe(1-τ)(3+)Fe(τ)(4+)O(3-y) 훼라이트 계(x=0.0, 0.2, 0.4)의 특성
Characteristics of Sr(1-x)(Ba, La)(x)Fe(1-τ)(3+)Fe(τ)(4+)O(3-y) Ferrite System (x=0.0, 0.2, 0.4)
E-mail:
초록
Sr(1-x)M(x)Fe(1-τ)(3+)Fe(τ)(4+)O(3-y)계(x=0.0, 0.2, 0.4)에서 M자리에 Ba와 La을 부분 치환하여 1. Sr1.0Fe0.41(3+)Fe0.59(4+)O2.795, 2. Sr0.8Ba0.1La0.1Fe0.47(3+)Fe0.53(4+)O2.815, 3. Sr0.8Ba0.2Fe0.44(3+)Fe0.56(4+)O2.780, 4. Sr0.6Ba0.2La0.2Fe0.52(3+)Fe0.48(4+)O2.840 및 5. Sr0.6Ba0.4Fe0.64(3+)Fe0.36(4+)O2.680 고용체 시료를 합성하였다. 모든 시료의 결정학적인 구조는 입방정계로 밝혀졌으며 격자상수 a 값은 Ba의 치환양의 증가에 따라 증가하는 반면 La의 증가에 따라 약간 감소하였다. 전반적으로 Ba와 La의 몰비가 증가함에 따라 Fe(4+)의 양이 감소하였다. Ba만이 치환된 시료 3과 시료 5의 전도도 값은 나머지 시료에 비해서 2차수 정도 작았다. 시료 1은 867K부근에서 급격히 무게의 변화를 보였으며 1323K부근에서 3-y값이 2.54를 보였고 나머지 시료들은 1323K에 접근할수록 3-y값이 대체적으로 2.5부근으로 수렴하는 경향을 보였다.
By partially substituting Ba and La at the M site of the Sr(1-x)M(x)Fe(1-τ)(3+)Fe(τ)(4+)O(3-y) (x=0.0, 0.2, 0.4), the follosing products were synthesized; 1. Sr1.0Fe0.41(3+)Fe0.59(4+)O2.795, 2. Sr0.8Ba0.1La0.1Fe0.47(3+)Fe0.53(4+)O2.815, 3. Sr0.8Ba0.2Fe0.44(3+)Fe0.56(4+)O2.780, 4. Sr0.6Ba0.2La0.2Fe0.52(3+)Fe0.48(4+)O2.840 및 5. Sr0.6Ba0.4Fe0.64(3+)Fe0.36(4+)O2.680. Crystallographic symmetries of all the samples were found to be cubic. While the lattice parameter, a increased with Ba, it decreased slightly with La. As a whole, with the increased mole ratio of Ba and La, the amount of Fe(4+) decreased. Electrical conductivities of the samples 3 and 5, with only Ba ion substitutions, were smaller than the rest of the samples by approximately 2 orders. Sample 1 showed abrupt weight change at 867K, and its 3-y value was 2.54 at 1323 K. 3-y values of the rest of the samples gradually approached 2.5 as the temperature increased to 1323 K.
  1. Wattiaux A, Grenier JC, Porchard M, Hagenmuller P, J. Electrochem., 134, 1714 (1987) 
  2. Wattiaux A, Grenier JC, Porchard M, Hagenmuller P, J. Electrochem., 134, 1718 (1987) 
  3. Hombo J, Matsumoto Y, Kawano T, J. Solid State Chem., 84, 138 (1990) 
  4. Lee ES, J. Ind. Sci. Res., 16, 387 (1998)
  5. Gallagher PK, Macchesney JB, Buchanan DNE, J. Chem. Phys., 43, 516 (1965) 
  6. Battle PD, Gibb TC, Lightfoot P, Matsuo M, J. Solid State Chem., 85, 38 (1990) 
  7. Macchesney JB, Potter JF, Sherwood RC, Williams HJ, J. Chem. Phys., 43, 3317 (1965) 
  8. Lee ES, Yo CH, J. Korean Ind. Eng. Chem., 4(2), 342 (1993)
  9. Lee ES, J. Ind. Eng. Chem., 2(2), 151 (1996)
  10. Yo CH, Lee ES, Pyon MS, J. Solid State Chem., 73, 411 (1988) 
  11. Grenier JC, Mater. Res. Bull., 19, 1301 (1984) 
  12. Yamamura H, Hadena H, Shirasaki S, Dakada K, J. Solid State Chem., 86, 1 (1981) 
  13. Takano M, Kawachi J, Nakanishi N, Dakeda Y, J. Solid State Chem., 39, 75 (1981) 
  14. Lee ES, J. Korean Ind. Eng. Chem., 8(6), 954 (1997)
  15. Grenier JC, Ea N, Porchard M, Hagenmuller P, Solid State Chem., 58, 243 (1985)