A system is described that combines the fermentation of cellulose to acetate, CH4, and CO2 by Ruminococcus albus and Methanobrevibacter smithii with the fermentation of acetate to CH4 and CO2 by Methanosarcina barkeri to convert cellulose to CH4 and CO2. A cellulose-containing medium was pumped into a co-culture of the cellulolytic R. albus and the H-2-using methanogen, Mb. smithii. The effluent was fed into a holding reservoir, adjusted to pH 4.5, and then pumped into a culture of Ms. barkeri maintained at constant volume by pumping out culture contents. Fermentation of 1% cellulose to CH4 and CO2 was accomplished during 132 days of operation with retention times (RTs) of the Ms. barkeri culture of 7.5-3.8 days. Rates of acetate utilization were 9.5-17.3 mmol l(-1) day(-1) and increased with decreasing RT. The K-s for acetate utilization was 6-8 mM. The two-stage system can be used as a model system for studying biological and physical parameters that influence the bioconversion process. Our results suggest that manipulating the different phases of cellulose fermentation separately can effectively balance the pH and ionic requirements of the acid-producing phase with the acid-using phase of the overall fermentation.